Harbor-freight-tools 47926 Manuale Utente Scaricare il pdf

Twisted Hardened Steel Wire Cup Brush

Item #47926 2-1/2” Wire Cup Brush Item #47927 3” Wire Cup Brush

Usage and Safety Warnings

3491 Mission Oaks Blvd., Camarillo, CA 93011

of this manual or any artwork contained herein may be reproduced in any

shape or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

Thank you for choosing a Harbor Freight Tools product! For future reference, please complete the

owner’s record below:

Model:_____________________ Purchase Date:_____________________

Save the receipt and these instructions. It is important that you read this entire instruction sheet to

become familiar with this product before you begin using it.

Warning: Always wear ANSI approved safety goggles, full face shield, and dust mask or respirator

when working with the Wire Cup Brush.

Warning: Never exceed the recommended maximum safe speed RPM.

2-1/2” Wire Cup Brush: 12,500 Maximum RPM

3” Wire Cup Brush: 12,500 Maximum RPM

Before using the Wire Cup Brush:

1. Inspect the brush and spindle for rust, damage or other kinds of deterioration. Never use the Wire

Cup Brush if damage is noted or if the brush is functioning improperly (losing filaments or is out of

balance).

2. Read and understand all warnings and instructions provided in the instruction manual of the power

grinder being used.

3. Make sure the maximum safe speed RPM on the Wire Cup Brush exceeds the “no load”

speed of the power tool being used.

4. With the power grinder’s electrical cord unplugged, install the Wire Cup Brush securely on the

power grinder.

5. The user of the power grinder, and all spectators in the work area must wear ANSI approved safety

goggles, full face shields and dust masks or respirators.

#47926 / #47927 Page 1

47926 27 Wire Cup Brush man.p65 10/30/03, 1:14 PM1

1 2

Pagina 1

Twisted Hardened Steel Wire Cup BrushItem #47926 2-1/2” Wire Cup Brush Item #47927 3” Wire Cup Brush

Using the Wire Cup Brush:1. Plug in the power grinder and test the Wire Cup Brush by running at operating speed for at least oneminute. During this

Modelli collegati 47927

Nessun commento